eduroam on-boarding for Android devices(CAT)

A Guide to on-boarding an Android device to Eduroam using CAT.  Please note the this is not the preferred way to setup eduroam for that follow https://support.lesley.edu/en/support/solutions/articles/4000185611-eduroam-on-boarding-for-android-devices-clearpass-

1. With your device connected to an off-campus WiFi network or your Cell provider's data connection, open the Play Store.
2. Search for and install the eduroam CAT app.
3. Open the eduroam CAT app.
4. Press Allow to let the app use your location
5. If Lesley University is listed, select it and skip to step 9, otherwise continue to the next step.
6. If Lesley University is not in the list, select Manual Search at the bottom
7. Enter Lesley into the search bar, and then press Search to find it
8. Now select Lesley University
9. If you get a "Allow eduroam to to access..." pop-up, press Allow
10. Press Install
11. Press Yes
12. Enter your Lesley email address with the @lesley.edu and password.  Then press Install.
13. Close the eduroam CAT app and go to your WiFi setting and select eduroam as your network.